(as of Jun 25,2022 17:00:35 UTC – Details)
1.Please use a GPU less than 32 cm. The rig is compatible with a single power supply, please make sure your power supply is a single channel power supply.
2. If using a 2000W rate power supply:
When you run the GPU overclocking, it is easy to burn the motherboard and power supply and GPU. It is recommended to use the GPUs under the rated power of the power supply. For example, when run the 3090/3080, 3090 rate power is 290W, the GPU overclocking power is about 350W. We recommend that you use 4 GPUs. Running 3070 and 3060 8 pcs is OK. Please reserve 300-400 W for other consumption
3. Mining rig is a unit requires technology. If you have any technical issue, Please contact us, we are happy to solve your issue.
Mining rig problem determination:
We have done a quick test before shipment. The rig will be slightly problematic, possibly due to long-term transportation and violent express delivery. When you get the rig, don't run GPUs immediately. Let's first test if the rig work.
1. Power supply troubleshooting
Check the power supply to see if the fan is turning.
Connect the keyboard to the computer, Press the Num Lock light on the keyboard. If the light remains off, the motherboard might be at fault. If the Num Lock light on and press again, the Num Lock light off, there is no fault with the motherboard.
1. Install the system
The SSD MSATA we configured is not installed with the system, You can log in to the official website of the corresponding system to download, there is a corresponding installation tutorial.
2. Cannot enter the BIOS
The HDMI cable is not compatible with the HDMI port. Please replace the HDMI cable.
3.Unable to detect GPU
You need to install the GPU driver.
【Built in 2000W Power Supply】 Built in 2000W power supply with 10 PCS long power leads, No-load decibel: about 60-65DB. It can be used at 176-264VAC (V) voltage. （Can not be used at household voltage of 110V） The The fan of power supply with a diameter of 60mm, and the number of revolutions is as high as 7000rmp per minute, and the heat dissipation effect is good. The power efficiency is about 90%. Please reserve about 300W for the motherboard, fan, and other cables.
【8 GPU Support】 8 GPU expansion slots in the mining computer case. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPUs simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPUs longer than 32 cm in length are unavailable. It is not recommended to mix various types of GPUs.
【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm.
【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The Fans run quietly, so the miner case can be used in home. The miner case has 5 USB ports, enough for daily work. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating.
【Mining rig package】 Note: Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU/PSU from overheating. Including: motherboard, CPU, power cord, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. The miner machine system doesn't come with GPU. If you have any questions, please feel free to contact us.